I have a toyota Electric Fork lift That has had some serious problems as I had to get into it pretty deep to find out why when the owners guys turned on the key nothing powered up? Im not a class AĮlectric fork lift technician but I know enough about electrical that I chased down a Five pin plug that was all melted together and shorted out I removed burnt socket and replaced the burnt wiresĪnd got power back to the ignition and truck I got it so it powers the hoist and power steering but have do final drive forward or reverse I have a wrench and a Code A 8 I did see another electrical Each error code and the time at which it occurred are displayed alternately at 2 and error code are displayed each time the knob switch is pressed and released.
TOYOTA DIAGNOSTIC CODES HOW TO
For how to display the main menu, refer to (1) From the main menu, display the diagnosis memory menu. Here the display method using the hour meter and tilt lever is described. Diagnosis memory display method To display the diagnosis memory display, there are a method using the hour meter and tilt lever, a method using the optional display, and a method using a When this happens, stop the vehicle immediately and check the error code.Ģ. Travelling or performing meterials handling operations, an error code is displayed and the lamps turn on as a warning.
![toyota diagnostic codes toyota diagnostic codes](https://image.jimcdn.com/app/cms/image/transf/none/path/sc35ef6025435ca24/image/if994523fb3cd5284/version/1535799510/image.jpg)
With the ignition key switch ON, if an abnormality is detected when the vehicle is stopped, The lamp lights once to allow checking for the bulb, and then turns off again if the status is normal. When the ignition key switch is turned ON, Diagnosis display method The diagnosis is displayed by means of an error code as shown in the illustration to the left, and by the lights turning on.